Combination filter 3M CF32 A2B2E2K2P3 R D DT-4045E

Filter set for full face mask and Scott blowers Duraflow and Proflow.Filter housing made of fibreglass reinforced plastic. The filters have a very high filtration value and low breathing resistance. Lightweight. Thanks to the right amount of carbon and pressure, it is easy to breathe through the gas filters and the combination filters. High capacity and low breathing resistance thanks to the large filtering surface of the particulate filter. Large air inlet duct reduces air flow resistance to a minimum. The gas filters have a very good gas and vapour filtration performance, thanks to the high capacity carbon. The absorptive surface area is large due to the micropores of the carbon. Good absorption capacity makes the product long lasting. The particulate filter is moisture resistant and provides excellent filtration of aerosols even in humid environments. NBC 10 year shelf life.

Complies with EN 141, 143 and 371. Can be used with all full and half masks with standard threads and Scott Autoflow and Proflow units. GF filters must not be used with blowers. Refer to the blower manual to determine which filter type is appropriate. NOTE! AX filters and AXP3 filters may only be used with Scott complete masks. Please note that according to EN 146 and 147, the product must not be used with any other filter than the approved ones. In accordance with EN standards, filters and blowers from the same manufacturer must be used.